S75 standard coarse 3ft symons type spring cone crusher
Product Description
The most widely used Cone Crusher all over the world
S series Spring Cone Crusher is the earliest one among current various cone crushers. Thanks to the proper crushing method, reasonable structure, advanced technology parameters and reliable operation, other models of cone crushers are derived from S series Cone crusher.
The advantages of S series spring cone Crusher are high efficiency, strong crushing force, high yield and low operation cost.
HIGH EFFICIENCY
The great combination of crushing cavity that designed according to the crushing principles and the fast spinning crushing head makes the S series cone crusher:
The material in the crushing cavity will be crushed by the strong impacting and squeezing force from crushing head, with high efficiency and low power consumption.
The material in the cavity will not only be crushed continuously, but also discharged continuously due to gravity.
The feed that enters into the cavity will be crushed three to five times. During each falling and re-squeezing procedure, the direction of feed will be rearranged. Therefore, the final product will be very fine with good shape.
Rotate the bowl liner when adjust the setting can not only make the bowl liner and mantle be worn evenly, but also keep the setting around the cavity as the same, with long cavity parallel, the product size will be uniform.
STRONG CRUSHING FORCE
Compared with other crusher models, the crushing arm of S series cone crusher is the longest, therefore:
The crushing force from the head to the feed in the cavity is strong.
The force from eccentric to shaft is small. The life of inner and outer eccentric bushing that work as sliding bearing is long since their temperature only increases a little.
HIGH YIELD
Compared with other crusher models, the crushing stroke of S series cone crusher is the largest. Large stroke means high yield. The reasons are as follows:
The material in the cavity will be crushed more efficiently. More material will be crushed in each stroke.
The large distance that head leave from mantle in each stroke not only allows more material to enter into the cavity but also forms larger volume of discharged material. Therefore, the material will pass through the cavity with faster speed.
Either the standard or short head cone crusher can be given choke feeding.
LOW DAILY OPERATION AND MAINTENANCE COST
Proper components material and structure design prolong the life of crusher.
Lone crushing arm decrease the load on the sliding bearing, gear tooth and main frame.
The uniform product size reduces circulation load.
The reliable overload protection system reduces overload.
The convenient hydraulic cavity cleaning system reduces downtime.
VARIOUS CRUSHING CAVITY SHAPE WILL MEET USERS’ DIFFERENT REQUIRMENTS
The difference between standard and short head cone crusher is the various cavity.
STANDARD CONE CRUSHER
Larger feed size and coarser product size.
Can be used for primary or secondary stage in open or closed circuit according to users’ condition.
Each standard crushing cavity can be divided into fine, media, coarse and extra coarse four types.
SHORT HEAD CON CRUSHER
Steeper crushing head.
Longer crushing cavity parallel and smaller feed size are conductive to produce fines.
Can be used for secondary or tertiary stage in open or closed circuit according to users’ condition.
Each short head crushing cavity can be divided into fine, media, coarse and extra coarse four types.
The most widely used cone crusher all over the world
S series spring cone crusher is the earliest one among current various cone crushers. Thanks to the proper crushing method, reasonable structure, advanced technology parameters and reliable operation, other models of cone crushers are derived from S series cone crusher.
The advantages of S series spring cone crusher are high efficiency, strong crushing force, high yield and low operation cost.
HIGH EFFICIENCY
The great combination of crushing cavity that designed according to the crushing principles and the fast spinning crushing head makes the S series cone crusher:
The material in the crushing cavity will be crushed by the strong impacting and squeezing force from crushing head, with high efficiency and low power consumption.
The material in the cavity will not only be crushed continuously, but also discharged continuously due to gravity.
The feed that enters into the cavity will be crushed three to five times. During each falling and re-squeezing procedure, the direction of feed will be rearranged. Therefore, the final product will be very fine with good shape.
Rotate the bowl liner when adjust the setting can not only make the bowl liner and mantle be worn evenly, but also keep the setting around the cavity as the same, with long cavity parallel, the product size will be uniform.
STRONG CRUSHING FORCE
Compared with other crusher models, the crushing arm of S series cone crusher is the longest, therefore:
The crushing force from the head to the feed in the cavity is strong.
The force from eccentric to shaft is small. The life of inner and outer eccentric bushing that work as sliding bearing is long since their temperature only increases a little.
HIGH YIELD
Compared with other crusher models, the crushing stroke of S series cone crusher is the largest. Large stroke means high yield. The reasons are as follows:
The material in the cavity will be crushed more efficiently. More material will be crushed in each stroke.
The large distance that head leave from mantle in each stroke not only allows more material to enter into the cavity but also forms larger volume of discharged material. Therefore, the material will pass through the cavity with faster speed.
Either the standard or short head cone crusher can be given choke feeding.
LOW DAILY OPERATION AND MAINTENANCE COST
Proper components material and structure design prolong the life of crusher.
Lone crushing arm decrease the load on the sliding bearing, gear tooth and main frame.
The uniform product size reduces circulation load.
The reliable overload protection system reduces overload.
The convenient hydraulic cavity cleaning system reduces downtime.
VARIOUS CRUSHING CAVITY SHAPE WILL MEET USERS’ DIFFERENT REQUIRMENTS
The difference between standard and short head cone crusher is the various cavity.
STANDARD CONE CRUSHER
Larger feed size and coarser product size.
Can be used for primary or secondary stage in open or closed circuit according to users’ condition.
Each standard crushing cavity can be divided into fine, media, coarse and extra coarse four types.
SHORT HEAD CON CRUSHER
Steeper crushing head.
Longer crushing cavity parallel and smaller feed size are conductive to produce fines.
Can be used for secondary or tertiary stage in open or closed circuit according to users’ condition.
Each short head crushing cavity can be divided into fine, media, coarse and extra coarse four types.
Product Categories : Spring Cone Crusher
Premium Related Products
